GSSL with a 4x2 Mixer for Parallel Compression?

My problem is this. I am constantly mixing on digital boards and I want to use parallel compression. This becomes a problem because of convertor latency and a lack of the right kind of comp in those nasty little boxes. So I have pondered and have come up with the idea above.

This is pretty much straight off of the John Hardy site. Page 5 figure 6.

http://www.johnhardyco.com/pdf/990.pdf

Is the 15k resistor at the trafo secondary necessary with the load of the pot and the load of the GSSL?

Please excuse the homely schematic... baby steps.

Am I on the right track?

Thanks!

Your image won't display "because it contains errors".

It displayed for me.

Pic isn't showing here either.

Have you also seen this one already ? It's the Crush 'n' Blend that SSLtech posted here, aimed at exactly what you're looking for:
http://www.groupdiy.com/index.php?topic=8360&highlight=crush++blend

Regards,

Peter

I changed the host to photobucket...

SSL's Crush and Blend is more elegant than my idea, but I have all of the elements to do it the brutish way.

I love the way the 990s sound driving an output, btw.

If anyone sees problems I don't know about with this design, please let me know...

Any opinion will help.

Thanks again.