DI switch placement

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sodderboy

Well-known member
GDIY Supporter
Joined
Feb 7, 2006
Messages
2,203
Location
Long Island
I just finished a DI Box for someone, and thought that this trick would be a good one to share. For years, I have been mounting the ground-lift toggle in one enlarged mounting hole of the MXLR to prevent it's being broken in use. I usually use a short lever, but long was specified by the buyer. As was the, ha-hem, Whirlwind iron inside.

normal_DI_Box.JPG

Mike
 
Back
Top