Nothing Sexy just pics of my LPS

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ethan

Administrator
Admin
Moderator
Joined
Jun 3, 2004
Messages
1,602
Location
DC
So this is what I did this evening...
I finally got around to building something I've been needing on my bench. You guessed it, a bench supply. independent 4 to 20V, pos. & neg. It's a really snug fit. The chassis is about 6X6 inches. 4 inches tall in the back and about 1 inch in the front. :shock:

Inside
Trippy Pic 2
Front Angle
Rear


Incidentally, in anyone is interested in building one I have a board layout, parts list, and schematic if ya want.
 
Congrats!

I noticed you used 2 transformers for your positive and negative supply...
instead of just one split transformer. Any reason?
 
[quote author="owel"]Congrats!

I noticed you used 2 transformers for your positive and negative supply...
instead of just one split transformer. Any reason?[/quote]

There are two 24V (actually its more like 25.4V fine quality radio shack :grin:) TXs to create a "48V center tap," because I couldn't find a 48V TX with a center tap. That's all. :sam:
 
You'll need some nice meters on that front too..

but the blue led is already there :grin:

Nice work, cool finish....
and yes, i could use one like this since i have not yet

What meters would do?

Tony dB
 
Back
Top