Rockitdog

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1220 on: February 11, 2020, 08:04:41 AM »
Here's everyting I have on this project : https://we.tl/t-6iQaqbnDkN

What a legend!  That was seriously quick. Thanks a bunch man.


Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1221 on: February 21, 2020, 04:46:30 AM »
Hi all guys, this is my first post here.

I would like to build a night EQ unit and I'm wondering if it's possible to add an input trim, a "signal" led and a "peak" led.
If so, any suggestions on how could I do it?

Thank you all,
Nicola

digitall2000

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1222 on: June 09, 2020, 06:34:05 PM »
hi all
i just got handed a preQ3 with switching PSU
it blows the first fuse (mains one) even when the PSU is not in the unit
i'm thinkin' it's the mosfets
does anyone have one of these puppies and could tell what the voltages on the PSU pins are
what is on the board is kinda strange for audio attached a pic of the connector
oh yeah IPD no longer sells this unit and has no info on it

so dasnevestheo

Here's everyting I have on this project : https://we.tl/t-6iQaqbnDkN
could you please re-post a link to the project docs
the link is dead

thank you muchly
lance
« Last Edit: June 09, 2020, 06:43:54 PM by digitall2000 »

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1223 on: June 09, 2020, 09:03:57 PM »
i just got handed a preQ3 with switching PSU

I don't know what is a preQ3,
I'm pretty sure you're in the wrong project thread

digitall2000

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1224 on: June 09, 2020, 09:21:59 PM »
well it's the same eq with a mic peramp in front of it

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1225 on: June 09, 2020, 09:24:22 PM »
This thread is for the Night EQ DIY project

digitall2000

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1226 on: June 09, 2020, 09:34:45 PM »
got it
i can read
but i came across this thread by someone mentioning the preQ3 in this thread
any info is helpful ifin someone wants to be helpful
now get off my back

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1227 on: June 09, 2020, 09:43:31 PM »
I'm being pretty helpful, it just depends if you want to be helped or not

Your problem is not related to the project this thread is dedicated to,
so you shouldn't be posting here

This is an help thread for DIY Night EQ  project builders

The correct place to post your problem is in the LAB section, you will get the help you need there

"The Lab
Electronics Repair and Troubleshooting"

I'm helping you out and I'm helping this thread out



« Last Edit: June 09, 2020, 09:59:45 PM by Whoops »

digitall2000

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1228 on: June 09, 2020, 09:53:45 PM »
and i do want to build this unit

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1229 on: October 06, 2020, 01:17:02 PM »
in case anyone needs pcb's, I found 4 extra night eq pcb's that I will not need.
I posted them for sale on the black market:

https://groupdiy.com/index.php?topic=76070.0


Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1230 on: October 30, 2020, 09:40:00 AM »
Air band questions. LMK if this is the wrong thread or if it's been covered.

Why the 200R/20R setup to use big caps instead of, say, a 2K/200R to enable using caps a tenth the size? Is there an impedance advantage? Also what are the advantages of using the inverting input resistor through a cap to ground, as opposed to a more conventional HPF? I'm aware that it helps with offset, unsure of the specifics though.

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1231 on: October 31, 2020, 07:13:29 PM »
Anyone got pcbs for this?

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1232 on: October 31, 2020, 10:06:22 PM »
Anyone got pcbs for this?

probably PeterC...

manulaudic

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1233 on: December 04, 2020, 05:04:12 AM »
Anyone heard from Peterc? I have ordered PCB'S from him in March and since September when he told me "Hi Manu

We have just gone to Level 1 lockdown which means they are allowing international air travel.
I will get to the post office tomorrow and send your PCBs. Thanks for your patience.

Peter"
I haven't heard anything from him... Nor have the PCB'S arrived.

Manu

peterc

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1234 on: December 04, 2020, 06:25:50 AM »
Hi Manu

Still not arrived? I will send out another set to you this weekend.
I sent them a while ago (will have to check) but our postal system is pretty crap.....

Sorry for the delay.
Peter
If opportunity doesn't knock, build a door.

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1235 on: December 04, 2020, 09:00:17 AM »
Depending on the countries International shipping is taking a long time.

I had orders from outside Europe taking over 3 months to arrive.

Best regards

manulaudic

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1236 on: December 04, 2020, 09:09:08 AM »
Hi Manu

Still not arrived? I will send out another set to you this weekend.
I sent them a while ago (will have to check) but our postal system is pretty crap.....

Sorry for the delay.
Peter

HA damn, thank you for the quick reply !
Nothing yet

ill send you pm

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1237 on: December 05, 2020, 10:03:17 AM »
Hello! I checked all the pages of this thread and all the links - it looks like the signal / clipping indicator schematic is lost.  :(   if someone has kept it, please share.

Whoops

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1238 on: December 05, 2020, 11:50:32 AM »
Hello! I checked all the pages of this thread and all the links - it looks like the signal / clipping indicator schematic is lost.  :(   if someone has kept it, please share.

Hi,
Did you use the respective link in Wayback machine?

Re: 3D "AIR" EQ - "Night EQ" PCB's Complete!
« Reply #1239 on: December 08, 2020, 01:18:47 PM »
Hi,
Did you use the respective link in Wayback machine?
yes, i checked all links by wayback mashine too. the signal / clipping indicator isn't preserved, unfortunately. I know that there are many other ready to use indication solutions, for example from the soundsculptor. just interested to see the original "air eq" indicator


 

Related Topics

  Subject / Started by Replies Last post
14 Replies
4208 Views
Last post December 18, 2019, 11:49:49 AM
by manulaudic
2 Replies
1992 Views
Last post August 25, 2009, 07:06:28 PM
by nhaudio
17 Replies
20236 Views
Last post April 10, 2012, 03:16:06 PM
by JohnRoberts
12 Replies
4961 Views
Last post December 13, 2010, 05:36:54 PM
by pucho812