[Siegfried Meier]

There's an option in the properties of each panel for this - it's an extra $20 or so per panel.  However, I know that my last panel I ordered did NOT have this checked off, and it still came back as a black panel with white filling.  The lettering looked white on the screen, so I left it and didn't worry about it.  Now, with silver panels, if you don't check it off, then it won't be filled with black, of course, so you have to check it off and pay the extra $20 some odd dollars.

Is this a case of, if it looks right then it is right?

Thanks,
Sig

[emtee]

Are you sure it was white & not just the Bare Ali showing through?

[Siegfried Meier]

Hmmm...sure looks white to me.  Tell me what you think.

[Ptownkid]

definitely white filled

[Siegfried Meier]

So, what gives?  It seems for a black panel, when you change from not filling to filling engravings, on the screen it looks identical.  So, turn it off and you still get the same.  But, definitely not the case with other panels and you need black lettering.

Anyone else think so?

Engraving Fill In

Started by lanxe The Lab

FPE file for Sumthing?

Started by timmygrimm The Lab

How not to fill your compositions with millions of instruments!

Started by Soeren_DK Studio A

Manual Sinking Parameters for 500 series in FPE

Started by chrispsound Drawing Board