GAIN value resistor in G9

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tony dB

Well-known member
Joined
Jun 4, 2004
Messages
1,304
Location
Belgium
i'm just starting to populate the pcb's and getting organised here. Noticed that my supplier gave me 68K resistors for R19 (82K). This is located close to the GAINsw2. Since this will influence gain at some point i wonder if it's ok to use the 68K instead or to re-order 82K?

Ordering right value will set me back a few days, but that's all. Am i right in thinking that i can throw the 68K in without any risks? (other then a deranged gainstructure)

Cheers,

Tony
 
[quote author="tony dB"]i just put 82K5 in, that should work as good as a 82K innit?[/quote]
Noooooo! That's 0.6% too high! That will never work! :wink:

Best regards,

Mikkel C. Simonsen
 
Back
Top