dukasound
Well-known member
Can I use 6922-E88CC insteed ECC88 in Pultec EQ?
Thanks
Thanks
6922-E88CC for Gyraf Pultec?
- Thread starter dukasound
- Start date
Help Support GroupDIY Audio Forum:
Yes.
dukasound
Well-known member
[quote author="gyraf"]Yes.[/quote]
Thanks Jakob
Can you tell me about transformers:what wattage?
Thanks Jakob
Can you tell me about transformers:what wattage?
DrFrankencopter
Well-known member
Allow for at least 300ma for the heater, and at least 10 ma for the plate voltage.
Cheers,
Kris
Cheers,
Kris
dukasound
Well-known member
[quote author="DrFrankencopter"]Allow for at least 300ma for the heater, and at least 10 ma for the plate voltage.
Cheers,
Kris[/quote]
Hi Kris
I will use two transformers like on Jakobs schematics. One 220V to 12V and one in wrong way 12V to 220V. It means that 300mA plus some curent is enought for both. What enought?.
Duka
Cheers,
Kris[/quote]
Hi Kris
I will use two transformers like on Jakobs schematics. One 220V to 12V and one in wrong way 12V to 220V. It means that 300mA plus some curent is enought for both. What enought?.
Duka
You will have to experiment with the ´transformers, as transformers behave differently.
If you use two 220:12V/500mA transformers, it should work.
Jakob E.
If you use two 220:12V/500mA transformers, it should work.
Jakob E.
dukasound
Well-known member
[quote author="gyraf"]You will have to experiment with the ´transformers, as transformers behave differently.
If you use two 220:12V/500mA transformers, it should work.
Jakob E.[/quote]
Its a answer.
Thanks
Duka
If you use two 220:12V/500mA transformers, it should work.
Jakob E.[/quote]
Its a answer.
Thanks
Duka
Brizco
Well-known member
hello
another newbie question:
i have my work on the gyraf pultec almost done, except the transformer and the 2x2 switch... and here is my question:
can i use a 2pole 6position (lorlin) switch instead of the 2x2?
thank you very much!!
another newbie question:
i have my work on the gyraf pultec almost done, except the transformer and the 2x2 switch... and here is my question:
can i use a 2pole 6position (lorlin) switch instead of the 2x2?
thank you very much!!
dukasound
Well-known member
[quote author="Brizco"]hello
another newbie question:
i have my work on the gyraf pultec almost done, except the transformer and the 2x2 switch... and here is my question:
can i use a 2pole 6position (lorlin) switch instead of the 2x2?
thank you very much!![/quote]
Yes
Every Lorlin you can stoped to have only two position
another newbie question:
i have my work on the gyraf pultec almost done, except the transformer and the 2x2 switch... and here is my question:
can i use a 2pole 6position (lorlin) switch instead of the 2x2?
thank you very much!![/quote]
Yes
Every Lorlin you can stoped to have only two position
Brizco
Well-known member
thank you very much
do you think that 20VA are enough or should i use more... maybe 30 or 40?
thank you!
do you think that 20VA are enough or should i use more... maybe 30 or 40?
thank you!
