New racked preamps. 1108 and AM-16

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Okay, on second thought, the hamptone will be a far better candidate for the power supply requirements. One supply to feed the pre and the 1108 would be far more appealing than having to run multiple supply lines.
 
jho, regarding the AM-16s: did you terminate the outputs with 600Ohm? If not it´s no wonder that it sounds not that good. The outputstage needs to see the load to be able to work within the specs.
 
[quote author="jensenmann"]jho, regarding the AM-16s: did you terminate the outputs with 600Ohm? If not it´s no wonder that it sounds not that good. The outputstage needs to see the load to be able to work within the specs.[/quote]

Yes, RTA shows large high frequency rise without correct load, and gain shoots up about 6 dB.
 
I'm almost positive that Cinemag also has an output tranny they originally made for the purple audio 1176. The part number is on here somewhere, but I can't seem to find it...anyone..?
 

Latest posts

Back
Top