kdawg
Well-known member
I have a Kent A-160 all tube P.A. amplifier that I can't find any information about.
It has two RCA connectors on the front for speaker connections, they go directly to an output transformer. The center tap goes to ground, and the other two wires go to two RCA jacks.
My question is - what ohm speaker load should be on here, and does it need to have two speakers connected to balance the output transformer?
The only markings on the transformer are "12 45 DYH5"
-kdawg
It has two RCA connectors on the front for speaker connections, they go directly to an output transformer. The center tap goes to ground, and the other two wires go to two RCA jacks.
My question is - what ohm speaker load should be on here, and does it need to have two speakers connected to balance the output transformer?
The only markings on the transformer are "12 45 DYH5"
-kdawg