versuviusx
Well-known member
i'm gonna try to make my own vocal trap booth. but i need a little help.
1. i have this PVC pipe that i'm using that is 1 and 1/4 in diameter. so i need some feet for them. now imaging the PVC is going to be in the air vertically and is going to connect to my Fiberglass sheets. the fiberglass sheets will be attached to eachother in the center by hinges. so the next thing i need are hinges that are going to help me attach the two sheets of fiberglass. then on each side of the fiberglass i will have the PVC pipes connected on the ends. any help would be awesome. if you need me to clear somethings up i will. i can maybe send a drawing.
i need hinges that realtraps has used like this:
http://www.realtraps.com/p_pvb.htm
see instead of using that metal fram to attach to the stand i want to use PVC pipe and not use the mic stand at all. i tried it and the weight of the vocal trap is too heavy for the mic stand. mine tipped over last night. could you imagine that happening in a real recording session.
so i need to find a way to make it more stabalized.
1. i have this PVC pipe that i'm using that is 1 and 1/4 in diameter. so i need some feet for them. now imaging the PVC is going to be in the air vertically and is going to connect to my Fiberglass sheets. the fiberglass sheets will be attached to eachother in the center by hinges. so the next thing i need are hinges that are going to help me attach the two sheets of fiberglass. then on each side of the fiberglass i will have the PVC pipes connected on the ends. any help would be awesome. if you need me to clear somethings up i will. i can maybe send a drawing.
i need hinges that realtraps has used like this:
http://www.realtraps.com/p_pvb.htm
see instead of using that metal fram to attach to the stand i want to use PVC pipe and not use the mic stand at all. i tried it and the weight of the vocal trap is too heavy for the mic stand. mine tipped over last night. could you imagine that happening in a real recording session.
so i need to find a way to make it more stabalized.