Double checking the measures for SUMTHING cases ...

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Purusha

Well-known member
Joined
Jan 14, 2006
Messages
1,868
Location
Somewhere on the Planet
I need to double check if my measures for the Sumthing cases are 100% correct. Who can help me?

I need someone who has the board at home and a 100% 1:1 printer to compare the printout with the board.
 
I did check this before with Joel but it won't hurt to double check it since there are many holes and repeating error of 0.1mm would make a big difference on the other side...

Here are the measures

Sumthing-M.jpg
 
I just did some quick measurements on my already soldered board and it looks right to me. I'd get one more person to check it if possible... thanks!

-Cameron
 
I don't have a printer that would work, so I can't help with that. Sorry :?
Send me a faceplate, and I'll check...
:cool:
 

Latest posts

Back
Top