[rotation]

I spent few hours searching for switch push button (4PDT Alternate) for Hamptone Jfet pcb based on Mnats layout.
I should get this switch:
http://www.altronics.com.au/index.asp?area=item&id=S1450

My ussual source is Farnell. I found some switches there, but i'm not sure which would be good for my needs. Link to Farnell:
http://uk.farnell.com/jsp/home/homepage.jsp

Can you help me out with this? I searched a lot with no luck. Probably because i never used switch like this before.
I don't need button with LED.

Miha

[moamps]

1123858, ALPS SPUJ193700 maybe

Pozdrav,
Milan

[Slenderchap]

We also sell an Alps SPUJ switch which may be suitable (part number AL-03-006).

http://www.audiomaintenance.com/acatalog/switches.html

If you click on the photo it will show you more details.

Where possible these are supplied in the "service style fitting" which have bent legs to stop them dropping out of the circuit board when soldered by hand.

Colin
www.audiomaintenance.com

[rotation]

1123858, ALPS SPUJ193700 maybe

Pozdrav,
Milan

Are you sure i could use this one? It has 6 legs and original has 14.  :?:

Slenderchap:

Yours has 12 legs, mine 14, but two are not used on the pcb. Would this work? Should i bend some legs? Which?

[moamps]

Are you sure i could use this one? It has 6 legs and ..

It has 12 legs. It is 4PDT Alternate type. The picture in catalog is just generic.

[Slenderchap]

The extra 2 pins at the front will be for the LED.

Colin
www.audiomaintenance.com

[rotation]

Aha, thanks. I thought they are for leds, but i couldn't figure out from the pcb beacuse i only have copper layer, no parts placement. It is good learning experience...
Nice, i can start soldering  :grin:

G1176: Turn Switch to Push Button Wiring : Diagram Enclosed

Started by heybluez Dynamic Processors

Latching push button switch banks - where to get them ??

Started by barclaycon The Lab

Gssl EAO push button SSL Switch?

Started by dfer The Lab

Correct LED illuminated push button switch voltage

Started by Classicaudio77 Filters/Equalizers