Help me find Switch Push Button-4PDT Alternate for Ham. Jfet

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rotation

Well-known member
Joined
Jan 24, 2006
Messages
402
Location
slovenia
I spent few hours searching for switch push button (4PDT Alternate) for Hamptone Jfet pcb based on Mnats layout.
I should get this switch:
http://www.altronics.com.au/index.asp?area=item&id=S1450

My ussual source is Farnell. I found some switches there, but i'm not sure which would be good for my needs. Link to Farnell:
http://uk.farnell.com/jsp/home/homepage.jsp

Can you help me out with this? I searched a lot with no luck. Probably because i never used switch like this before.
I don't need button with LED.

Miha
 
We also sell an Alps SPUJ switch which may be suitable (part number AL-03-006).

http://www.audiomaintenance.com/acatalog/switches.html

If you click on the photo it will show you more details.

Where possible these are supplied in the "service style fitting" which have bent legs to stop them dropping out of the circuit board when soldered by hand.

Colin
www.audiomaintenance.com
 
[quote author="moamps"]1123858, ALPS SPUJ193700 maybe

Pozdrav,
Milan[/quote]

Are you sure i could use this one? It has 6 legs and original has 14. :?:

Slenderchap:

Yours has 12 legs, mine 14, but two are not used on the pcb. Would this work? Should i bend some legs? Which?
 
[quote author="rotation"]
Are you sure i could use this one? It has 6 legs and ..[/quote]

It has 12 legs. It is 4PDT Alternate type. The picture in catalog is just generic.
 
Aha, thanks. I thought they are for leds, but i couldn't figure out from the pcb beacuse i only have copper layer, no parts placement. It is good learning experience...
Nice, i can start soldering :grin:
 
Back
Top