HI, I HAVE TO EXTRACT THE PINS FROM SOME FEMALE EDAC/ELCO CONNECTOR , BUT I DON'T HAVE IDEA HOW TO DO , SOMEONE CAN HELP ME?
TONS OF THANKS IN ADVANCE
69
I found a household pin with the head cut off was just the right size when shoved into the receptacle between the wall & the "barb". Once in, pull gently on the wire soldered to the pin to get it out.
The guys I was working for were too cheap to buy an extractor....
I've used those extractors - you can probably get the pins out with a decent pair of tweezers shoved up there. The extractor is basically a tweezer with a blue handle and a punch mechanism.