lang + Neon lamps

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sonicmook56

Well-known member
Joined
Oct 17, 2005
Messages
299
Location
Los Angeles | Echo Park
I have a Lang PEQ-2 and both neon indicators are shot. Neon lamps being way before my time, I have no idea what I'm looking for in terms of a replacement.. I do know that:

Its a T-2 in size
I measure 100vac across the leads.

Mouser have a couple that have a Breakdown Voltage of 65vac @700mA (or) 300mA.

What values should I be looking at here?
 
Perhaps this is what you're looking for?

http://webtronics.stores.yahoo.net/semiconductor-devices-lamps---displays-110v-neon-indicator.html
 
Mine are out too. I just never got around to looking them up to see what they were. I"d assume they run on 110v AC. I think if you can find one that runs on 110ac and fits the hole size that would be it. I do have some red ones I got from either mouser or digikey which may work as a replacement, but it seems to me they were a little larger. Maybe I'll take a look at mine tomorrow and see what's in there.
 
Back
Top