DIY guitar signal splitter?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
yes

5532 opamp set for unity gain will work just fine.
use a 9 vdc battery supply for low noise.

or buy one at Banjo Center for cheap.
 
Radio Shack box and three 1/4" is the quickie fix. That is if they still sell parts! A step up in quality would be a Hammond box and Switchcraft 1/4" connectors.
This stylee works well up to 4 splits, and then I like to go active.
Mike
 
Y cable works, but if Fender, go in and short the 68 K mixing resistors on the input jack.
this will make the Marshall see the same mV as the Fender.

saw Hendrix at Monterey last night on PBS, wow, Take That!
is what he was sayin. to the Who.

Mama Cass was in total terror of Janis.
Good stuff!
and Otis, of course.
 
Back
Top