Pultec filter section question

Cool!!!
I did not know this was around. Someone over here must have one I guess.....


I see I'll have to run this through the de-pixelyzer.

well, there is a lot missing, you have to reverse the filters
with the charts at the M site and a filter simulator.

see the pot wiper bar things?
there are some parts represented by that block...

here is the original pdf.
you can blow it up all you like.
i put a warning label on it saying that it is bogus, worthless, amd all that, and not a M doc, so I think we will be ok.
they have a newer ver out anyway.

enjoy.
i jave the filters reversed if your interested in how,what,why, etc.

http://vacuumbrain.com/The_Lab/Pultec/massive_passive.pdf

Wow! Thanks a lot CJ!

O and eh....Very interested in those filter sections as well...

Filter Reversal

1) go here and save the manual to disk:

http://www.manleylabs.com/PDF/PRO_Manuals/Massive/Massive%20Passive%20Manual.pdf

2) open the file

3) print out the filter sweep charts\

5) click on this to install the filter software necessary for reversing:

ftp://ftp.nuhertz.com/filter/FF5_2_1.exe

6) if you run win98, (like me becuase all other windows software sucks) here is an older version that took me two hours to find:

http://vacuumbrain.com/The_Lab/Software/FF4_0.exe

Thanks again CJ! That's quite a nifty program ....

so which frequency and filter section do you want to reverse first?
pick a band from the deck. any band. now remember that band.
.
.
.
is this it:

4k boost?

darn!

ok, pick a band....any band........

:?:

Well...you must have heard about David Blaine then.....

http://www.youtube.com/watch?v=AYxu_MQSTTY