Making PCB

pucho812 · Oct 4, 2004

Hi guys I am a newbie. I am curious as to thoughts on making PCB. I am looking for an easy alternative/Cheap alternative to having them made via online company. I found this stuff. Has anyone tried it? Does it work well? http://www.techniks.com/how_to.htm

jrmintz · Oct 4, 2004

Hi Pucho,

I use it all the time, with very good results. You just have to make sure you iron it long enough to do a good transfer, and make sure you print or copy the image reversed to the correct side of the paper.

Good luck!

owel · Oct 4, 2004

I use it too... but in my experience, extremely thin traces are not recommended (like the ones shown in this pic)

pucho812 · Oct 5, 2004

hmmm something to think about? but thanks for the reply. I am starting off with big traces so it should be o.k.

gyraf · Oct 6, 2004

There's always the good old-fashioned way:

http://www.gyraf.dk/gy_pd/pcbs.htm

Jakob E.

Making PCB

Help Support GroupDIY Audio Forum:

pucho812

Well-known member

jrmintz

Well-known member

owel

Well-known member

pucho812

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

Making PCB

Help Support GroupDIY Audio Forum:

pucho812

Well-known member

jrmintz

Well-known member

owel

Well-known member

pucho812

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!