racking up some wardbeck modules PSU question?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pucho812

Well-known member
Joined
Oct 4, 2004
Messages
14,830
Location
third stone from the sun
wardbeck466.jpg


looking at the photo and reading the manual

It says the modules need
+/-25VDC with a max of 100mA
I have 2 in front of me that are going into a rack to fed from the same PSU. am I going to o.k. in building/or picking one up from mouser, a PSU that outputs at a max of 100mA or should I go for a little higher?
 

Latest posts

Back
Top