Here's the thing: I'v got this old Ibanez sdr1000 reverb, & the bypass switch is hooked to a relay. When I first turn the unit on, the bypass relay works fine. After a couple of minutes, though, there's a very small noise & the relay ceases to work. It'll work again after a long rest, but stops again just as quickly.
I've replaced the relay--to no avail. The relay doesn't seem to be overheating or emitting untoward noises. My question is, since the relay itself isn't the problem, where should I be looking? Is it likely to be a problem with the bypass switch itself, or a voltage issue, or what?
Thanks
tom
I've replaced the relay--to no avail. The relay doesn't seem to be overheating or emitting untoward noises. My question is, since the relay itself isn't the problem, where should I be looking? Is it likely to be a problem with the bypass switch itself, or a voltage issue, or what?
Thanks
tom