Racking Amek Einstein - Project COMPLETED!!!

Ok !!
Thank you Whoops.

An advice for the front panel and the case ?

The best webshop where i can buy the parts for the grinder  board ?

Thx

Didierterrific said:

An advice for the front panel and the case ?

Click to expand...

How many units do you want to rack?
Do you want 1U or 2U?

for the case, Modushop in Italy.
For the front pannel you need to do a cut-out, the front pannel will be just a Frame then for the Einstein front pannel.
Talk to Frank Rollen or Schaeffer to order a custom one

https://www.frontpanels.de/
https://www.schaeffer-ag.de/en/front-panel-designer/?lang=en

Didierterrific said:

The best webshop where i can buy the parts for the grinder  board ?

Click to expand...

Banzai effects
farnell
mouser
Your Local electronics store

Just one unit for the moment.

Thx one more time !!!

Regards

Hi Whoops,
Do you remember which balancer board you used for the outputs ?
And I'm looking for a simple preamp for the tape return. An advice ?
Thx
Didier

Didierterrific said:

Hi Whoops,
Do you remember which balancer board you used for the outputs ?

Click to expand...

Yes, I think I already told you previously, I've used the SSL9K balancing pcb it had 2 channels on the pcb.
The boards were from Gustav now PCBGrinder.

Ask him for those boards or ask in the black market you will not have many problems in finding those

Didierterrific said:

And I'm looking for a simple preamp for the tape return. An advice ?

Click to expand...

Don't know if it's simple enough for you or not but I've used the SSL 9K preamp which is a great sounding preamp, much better than the Amek Einstein one.
I would definitely use a transformerless preamp for this

Thx Whoops !

Didier

Hi Whoops,
Here is my Rack.
All seems to be OK, It works, but I have a buzz on all outputs.
Any idea ?
Thx
Didier

Didierterrific said:

All seems to be OK, It works, but I have a buzz on all outputs.
Any idea ?

Click to expand...

Could be grounding problems, could be EMI...

Record the "Buzz", take photos of the insides

Hi Whoops,
Thx for the reply,
Here is the picture

How can I send you the sound ?
Thx

Didier

Maybe this link ?

https://www.dropbox.com/s/6srba29dim1ngnc/Einstein%20buzz.mp3?dl=0

Didierterrific said:

How can I send you the sound ?
Thx

Didier

Click to expand...

you can post on youtube, or send me an email , it's better a link here in the thread so other people can have a listen.
I normally post noises with a video on youtube.

Didierterrific said:

Maybe this link ?

https://www.dropbox.com/s/6srba29dim1ngnc/Einstein%20buzz.mp3?dl=0

Click to expand...

Ok,
I listened to the buzz,
pretty nasty.

1) Unscrew the Toroid transformer and try to move it around, and bring it out of the case (if cable lenght permits) while listening for the buzz. Does the buzz change with the distance of Toroid to PCB's?

2) do a drawing (it can be made in Paint) of how you connected all the grounds. So a drawing of the grounding layout and connections. That way I can check it out

I tried to move the toroid outside, same thing !

I don't really have grounding layout.

I just connected all the grounds at their points.
I think it's the problem, but I don't know how to do a proper grounding layout.

Didierterrific said:

I tried to move the toroid outside, same thing !

I don't really have grounding layout.

I just connected all the grounds at their points.
I think it's the problem, but I don't know how to do a proper grounding layout.

Click to expand...

Do a drawing of how you connected all your grounds

there's some examples in this thread:

https://groupdiy.com/index.php?topic=46362.600

Hi Whoops,
here is a schema with all the connexions.
Ground links and 0v are in red.
as you can see, only the IEC is linked to the chassis...
Maybe the toroid is underesized ?
Thx

Didier

Didierterrific said:

Maybe the toroid is underesized ?

Click to expand...

what are the transformer specs?

Didierterrific said:

as you can see, only the IEC is linked to the chassis...

Click to expand...

There should be a connection between PSU 0V and Chassis though a 10R resistor and 0,1uf cap.
something like this:



Try it out, you can easily try it with aligator clips.

What is the "Symetrizer stereo module"?

The toroid is a Talema TRT30218 : 2x18v 30VA
https://www.banzaimusic.com/Talema-TRT30218.html
the symetrizer module is this one :
https://www.audiophonics.fr/en/preamp-module/module-unbalanced-to-balanced-symetrizer-ne5532-btl-stereo-p-12296.html

I try the cap and resistor between the PSU 0v and the chassis
do I need to link one the XLR ground ?

Thx

Didier

Didierterrific said:

I try the cap and resistor between the PSU 0v and the chassis
do I need to link one the XLR ground ?

Click to expand...

You could try, bu normally XLR PIN1 connects directly to case only and not to PCB