G7 question and DIY fet47 ?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

drive

Active member
Joined
Feb 15, 2007
Messages
35
How much does it cost to make a G7 and are there any parts hard to find ?
Is it hard to make ?

Also I was wondering if there is any fet47 projects that exists ?
 
How much does it cost to make a G7 and are there any parts hard to find ?
Is it hard to make ?

Hi!
I built a G7 and I think I spent somewhere around 400€. But of course this largely depends on the capsule being used as you can spend anything from 100€ to nearly unlimited;-)
Mine wasn't hard to make at all. I have to add that I used the body ioaudio did and everything went very smooth but again that depends on the housing you have.
The only "hard to get" part would be the 1GOhm resistors, I bought mine from rs components...Still not a problem...
I REALLY enjoy mine as it is the only mic I own that absolutely stands out sound wise.
 
Fet47

Go to the neumann site, look around you can find the manual and schematic.

Then look at how it is built and the transformer etc.

For the G7 lots of posts here in the meta did you look at its home site? Price out the parts yes it will take some work and time.
 
Back
Top