MCI 500 HELP NEEDED ON CV control to VCA ..CV goes crazy

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

roginator

Well-known member
Joined
Nov 7, 2005
Messages
467
Location
CROatia
whell I have a problematic CV on I/O channel
actually when turning on desk..i/o cv seems to work OK, but after 2 hours ..cv goes crazy...and range is smaller after 3 hours it goes to distorsion in all range of fader is same level

tried another VCA , same thing, and another...again same thing

replaced transistor in that area
tl080

but still nothing
actually from fader I have signal and its all the time OK but after 100K reesistor on input of tlo80 pin 2 evrything goes wrong...

same effect when using VCA busses 1-8 so problem is in fader ACN buffer around TL080

anybody any idea...

HELP!!!!
 

Latest posts

Back
Top