GPultec-Wiring inductor first in passive signal path

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JW

Well-known member
Joined
Jun 8, 2005
Messages
1,100
Location
Portland USA
I had read, (I think it was Tat) of someone putting the inuctor before the high boost caps to get a different sound.

I thought I'd try it, so I took the 10K boost pot wiper connection and connected it to the first leg of the inductor (100mH) I disconnected the 22mH output of the inductor and wired that lead to the last of the high boost caps (3.3nF)

It sound to me like either the inductor is working and the caps aren't or visa versa.

Can someone explain what I'm doing wrong?
 
Back
Top