Hairball Audio, LLC - DIY Kits and Components. HairballAudio.com

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Awesome guys!

LED VU meters are back in stock for those who were asking about them.

Everything is in stock except for attenuators and enclosures.

Attenuators should be here by the end of next week (remember you can always get these at Classic API as well).

Blue Stripe and Blackface enclosures are still on schedule to be here by March 10th.

Thanks,

Mike
 
Hey Mike
got mine this week. everything looks excellent; I'll post some pics once its all up and running.
thanks,
Alex
 
Echo North said:
Blue Stripe and Blackface enclosures are still on schedule to be here by March 10th.
Thanks,
Mike

Hi Mike, is it possible to prepay, or put a black  enclosure on hold, in hopes of getting one of the incoming units? I built up a shopping cart at hairball audio, but the payment page does not come up, due to the lack of stock on that unit. What is the best way for me to proceed?
 
HI Mike,
got my parcel yesterday,
awesome work on the case,
the hardware is so easy to build !!
a real pleasure,
Thanks for this great parts !!
pacemaker
 
envelope said:
Hi Mike, is it possible to prepay, or put a black  enclosure on hold, in hopes of getting one of the incoming units? I built up a shopping cart at hairball audio, but the payment page does not come up, due to the lack of stock on that unit. What is the best way for me to proceed?

Hey,

Yes I turned off the pre-ordering so there would be some case left when they came in.  I was also trying to limit the orders on backorder in case there was some unforeseen problem.

Just check the store around March 10th.  There will be plenty available and I'm sure they will last a few weeks.

Thanks,

Mike
 
Hi Mike !
i have ordered the parts form mouser using your mouser partlist reference,
and i think there's a mistake, the bourns 250k pot is a linear,
while it was supposed to be a log one,
Is it normal or is it a mistake in the BOM ?
regards,
Francois
 
HI Mike,
got my parcel 3 days ago.
Now unit is finished and working. ;D
Thanks!

Marcin
 
pacemaker said:
Hi Mike !
i have ordered the parts form mouser using your mouser partlist reference,
and i think there's a mistake, the bourns 250k pot is a linear,
while it was supposed to be a log one,
Is it normal or is it a mistake in the BOM ?
regards,
Francois

Hi,

Yes it should be an audio taper not linear. 

It's weird, the same manufacture part number shows as an audio taper at digikey, and in the mouser catalog they show it as audio.  However, on their online shop it's linear.  Looking into this.

Classic "blackface" enclosures/kits should be back up for sale later today.  I have to go through them first to make sure they are correct.

Thanks,

Mike
 
check the store around March 10th.  There will be plenty available and I'm sure they will last a few weeks.
Thanks, Mike
[/quote]

I see they are back, albeit a little more expensive. Still, a great price, my order has been placed. Thanks Mike.
 
Yes the originals are back up.

Unfortunately my price was raised by $10 so I had to add $10 to the sale price.

Blue stripes should be up for sale Tuesday.

Mike
 
Hi Mike,
i had time to test the bourns pot from mouser with my multimeter
and it seems to be a log one, cool !!
So it might only be an error in the Mouser listings,
If you have time to check it too,
so we would be sure and it could help future builders.
Best regards
Pacemaker
 
pacemaker said:
Hi Mike,
i had time to test the bourns pot from mouser with my multimeter
and it seems to be a log one, cool !!
So it might only be an error in the Mouser listings,
If you have time to check it too,
so we would be sure and it could help future builders.
Best regards
Pacemaker
Hi, i have check that on my side too and its an error from the mouser listing. This pot is from the 95 guitar potentiometer series and those are all audio taper. !
Hub
 
Awesome.

That's great news guys.  The pots I have are from Digikey and it's the exact same part number and they are (listed as audio on digi) audio taper.

Nice!

Mike
 
yeeeaaaaaaahhhhhhhhhhh !!!!!!!!
very good news !

i now have a small issue about wiring a mallory T600,
I have read skylar wiring pdf file, Mnats REV D 2.0 file etc..
but i couldn't find if i need the 2 620R resistor
can someone help me on this ?
Pacemaker
 
Hi!

I´ve bought your stereolink kit and am in the process of implementing it to my build.
just one question to the wiring:
I am using mnats rev j roatry switch board, so pad 15 goes from the ratio board directly to the pcb,
the output pot is connected to the ratio board.
So which cable should be soldered to the link switch?
the one from the output pot or the one to the pcb?  ???
or does it even matter  :p
just want to be sure before i unsolder everything.....

THANKS

 

Latest posts

Back
Top