[colonelmot]

Hey People

I'm about to make a pair gyraf pultecs. I don't feel I need the hi cut band as much I need a mid cut
Could I just change the cap values on the the hi cut to achieve this?
The frequencies I 'd want to put in would be something like 280, 400, 500 , 650 , 800, 1k

Could this cause other problems to the circuit or is there anything I need to consider
for example Is the hi cut shelving or peak?

Thanks

Tom

[okgb]

The mid cut on the MEQ uses an inductor , but you could graft that ,
 i'm planning on adding the Hi boost section of the PEQ to an Meq
[ same sort of logic as you  ] the " parametrics " certainly have quite a
 few sections  so i think it is doable [ Dave Hill had told me something
about being able to multiple bands together before needing a buffer
and then something about impedances  but i forget that

[CJ]

Is this a MEQ or a EQP you are building?
Thanks.

[okgb]

Incase i confused the issue , i was thinking he meant  eqp ,
but  i was suggesting to look to the meq for the mid cut ,
as a more effective way to get it
 [ wouldn't happen without the inductors ]

[colonelmot]

Yeah I'm building Gyrafs EqP - was hoping to mod in a mid cut
Has anyway succesfully added CJ's cut modification as shown in another pultec thread?

HELP: Opamp stage for mid cut or mid boost

Started by Richon The Lab

g-pultec frequencies for LOW FREQ/ HI FREQ/ HI CUT

Started by hotbaby The Lab

HOw much cut/boost from pultec?

Started by strangeandbouncy Brewery

pultec high cut values

Started by skal1 The Lab