Rellister
Well-known member
Arrived here too!
Thanks!
Thanks!
S800 Support Thread
- Thread starter mrphotodude
- Start date
Help Support GroupDIY Audio Forum:
kpearsall
Well-known member
boards arrived in wisconsin. Thank you peter I can't wait to build these!!!
Would an +-24V 0.6A Power One supply adjusted down to +-18V be suitable for powering 2 channels of S800 EQ and 4 channels of W492 EQ? (the W492 has opamps rated for higher voltage).
Thanks,
Craig
Thanks,
Craig
spase
Well-known member
....
spase
Well-known member
Finally i take those boards from customs.Thank you Mr.Peter.
Kind Regards
Spase
Kind Regards
Spase
peterc
Well-known member
Hey Spase
Glad you finally got them, enjoy the project
Peter
Glad you finally got them, enjoy the project
Peter
spase
Well-known member
im starting to collect the caps for this project.anyone can tell me what voltage should i need to buy?
peterc
Well-known member
25v or 35v for electrolytic, other caps start at 50v so those will be fine.
spase
Well-known member
and for the switches i need spdt and dpdt ( on - on ) right?
evilcat
Well-known member
spdt for frequencies (lo and hi) and 3PDT for the bypass
spase
Well-known member
http://www.omeg.com/br2bubr2.htm can i use this pots im gonna remove those metal ears from them? they are 22k lin omegs
MasonAtom
Well-known member
I finally got around to completing my build (from the original group buy!).
I've posted some pictures here: https://plus.google.com/u/0/photos/116886998028395181572/albums/5701571111086718129.
I haven't done any extensive testing on it yet, but I like what I've heard so far when using it on DI bass and guitar.
Mason
I've posted some pictures here: https://plus.google.com/u/0/photos/116886998028395181572/albums/5701571111086718129.
I haven't done any extensive testing on it yet, but I like what I've heard so far when using it on DI bass and guitar.
Mason
spase
Well-known member
403. That’s an error.
We're sorry, but you do not have access to this page. That’s all we know.
Fix your link
We're sorry, but you do not have access to this page. That’s all we know.
Fix your link
Paul Fawcett
Member
spase said:
Works for me.
audiophreak
Well-known member
spase said:
403 error message for me too
I've never been able to get the LMF of one of my two channels to work. Everything else is fine with that channel, but when I boost or cut the gain know nothing happens. I've checked for bad soldering, and am to the point were I'll have to pull each component out of this section to see where the problem is. Is there one part that would completely stop this section from working?
Thanks,
Craig
Thanks,
Craig
shabtek
Well-known member
@craigmorris; could be a bad pot--wiper not making contact
