Hammond

Any 1081 pcb layout for self etch?
« on: October 09, 2008, 01:37:50 PM »
Any 1081 pcb layout for self etch here at the forum?
I 've searched but had not luck.


kazper

Any 1081 pcb layout for self etch?
« Reply #1 on: October 11, 2008, 01:54:24 PM »
check your mail.
Intentionally left blank

bluesbaz

Re: Any 1081 pcb layout for self etch?
« Reply #2 on: April 16, 2010, 03:45:56 AM »
How about one for me kazper?

hobiesound

Re: Any 1081 pcb layout for self etch?
« Reply #3 on: April 16, 2010, 06:39:22 AM »
gdiy gmail!!! please!!!

greetings,

Thomas

ptron

Re: Any 1081 pcb layout for self etch?
« Reply #4 on: November 26, 2010, 08:15:36 PM »
wohoooooo!! search works great!! i love this forum!!!!!

tron888 at hotmail dot com

pleasee can i get it too? :) and ill take you out for tacos when u are in mexico ;D

EDIT
uh found it (actually 2 kinds...) both seem pretty hard haha :D will leave it for now ;D
« Last Edit: November 26, 2010, 08:59:58 PM by ptron »
No, you are correct; $30k for coffee and occasional BJs is considered a good bargain stateside.

http://www.facebook.com/tronmusic

Kir_For_Pleasure

Re: Any 1081 pcb layout for self etch?
« Reply #5 on: November 27, 2010, 05:30:48 PM »
svarten5 at spray dot se
Cheers !!
Thomas
Sweden

Re: Any 1081 pcb layout for self etch?
« Reply #6 on: November 28, 2010, 03:01:10 PM »
I would love to have that information....please?

seandavidharris at gmail dot com

gemini

Re: Any 1081 pcb layout for self etch?
« Reply #7 on: November 29, 2010, 07:44:59 AM »
me want...geminimusik @ gmail.com


bpucekov

Re: Any 1081 pcb layout for self etch?
« Reply #8 on: November 29, 2010, 08:04:03 AM »
me too
bpucekov at inet dot hr

Citrus Hill

Re: Any 1081 pcb layout for self etch?
« Reply #9 on: December 14, 2010, 04:18:05 AM »
Hi Kazper,
i would like a copy also if possible.
citrushill(at)gmail(dot)com
thanks,
Rob Mc.


julien31

Re: Any 1081 pcb layout for self etch?
« Reply #10 on: December 14, 2010, 06:28:07 AM »
Please one for me too!

soulajulien at yahoo dot fr

creal

Re: Any 1081 pcb layout for self etch?
« Reply #11 on: December 15, 2010, 10:10:12 AM »
and me too
ganeshdrummer at hotmail dot fr

Or in gmail account ;)
thx

Re: Any 1081 pcb layout for self etch?
« Reply #12 on: December 23, 2010, 05:30:11 AM »
May I get a copy Santa ?  ;)

jdelgoulet(at)free(dot)fr

Thanks !!!

kim

Re: Any 1081 pcb layout for self etch?
« Reply #13 on: December 23, 2010, 05:56:29 AM »
i would like the layout too if possible (kiml26 at hotmail dot com)

kazper

Re: Any 1081 pcb layout for self etch?
« Reply #14 on: December 23, 2010, 11:42:28 AM »
There is no self etch layout..  I'm sure one of you crafty guys could do a layout from the original build files.

Just remember the 1081 has almost unobtanium switches..

IMO it would be better to build a layout like the new 1084, but use multiple parts to cover the same functions.


Sorry there is... Had to look on my drive.

Same thing posted above still applies. I'll place it in the Group mail later today and repost here.
« Last Edit: December 23, 2010, 11:47:38 AM by kazper »
Intentionally left blank

creal

Re: Any 1081 pcb layout for self etch?
« Reply #15 on: December 23, 2010, 01:25:39 PM »
Hi all,
Here is some info about the TEN81
http://www.nrgrecording.de/html/neve1081.html
http://audio.kubarth.com/ten81/

I put the RAR files on the gmail account for the Traces/Overlay and BOM of the  B312,B338, B340...
I hope to start this project soon, but i need to find some parts like the switches, marconi knobs...

Maybe we can make a groupbuy for this parts???
Thanks to Patricio for this files

Creal

kazper

Re: Any 1081 pcb layout for self etch?
« Reply #16 on: December 23, 2010, 01:58:55 PM »
Thats basically most of the stuff I have.

The big issue is the switches, Collin stocks the Carnhill equivalents of everything in the Iron department.

Check out this thread: http://www.groupdiy.com/index.php?topic=34113.0
« Last Edit: December 23, 2010, 02:10:43 PM by kazper »
Intentionally left blank

ptron

Re: Any 1081 pcb layout for self etch?
« Reply #17 on: January 12, 2011, 09:42:07 PM »
woo been away!! feels good to get back on the bench .

no problems for the files anytime i found em somewhere a few months ago.  im pretty sure im not ready to undertake this monster just yet :D but maybe next year! first i want to try something simpler and less of a brainbender as my second diy project :D
anyways good luck with it! and well if there is anyone etching pcbs count me in for one set :) .. as i said maybe next year.. or the one after!

cheers!
No, you are correct; $30k for coffee and occasional BJs is considered a good bargain stateside.

http://www.facebook.com/tronmusic

PeterL

Re: Any 1081 pcb layout for self etch?
« Reply #18 on: April 10, 2012, 12:26:31 PM »
Hello!

I'm hoping to start building a pair of these very soon, though I can't seem to find available PCBs. Anybody have any self etch files available?

Bluzzi

Re: Any 1081 pcb layout for self etch?
« Reply #19 on: April 10, 2012, 01:26:03 PM »
The 1081 also has many components no longer being made. It would need a good redesign and full testing in order to make this a viable project. That is why I made my EZ1084EQ. I also prefer the amp section on the 1084 but that is a matter of taste.

I found the switches a long time ago and the minimum qtys were prohibitive. There are other issues. Yes you could use fancy switching and alter the design but it no longer would resemble a 1081 would it?

If there was enough interest I'd look into making this project available. But the 1084 is so satisfying that it makes the 1081 unnecessary in my opinion.

Cheers

Jim



 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1302 Views
Last post January 31, 2009, 02:44:55 PM
by mad.ax
3 Replies
1472 Views
Last post May 12, 2010, 06:44:11 PM
by juanjovincenzo
21 Replies
7016 Views
Last post March 28, 2012, 02:11:35 PM
by zayance
2 Replies
1217 Views
Last post April 03, 2012, 03:36:47 PM
by pucho812