Creating cable assemblies

Advertise with us
shop deals on amazon
Shop deals on ebay
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
O

owel

Well-known member
Joined
Jun 3, 2004
Messages
1,088
Location
Nashville, USA
What kind of tool do I need to create these kind of cable assemblies?

(First Column in the table - Flat Flex Cable Assemblies)
http://dkc3.digikey.com/PDF/T083/P0073.pdf

0.1" terminals to either discrete wires or ribbon cable, then to 0.1" terminals again.
 
I use a vice to crimp flat ribbon cables with IDC or whatever connectors.
Works ok.
You can split them apart if you screw up and start over.
Sometimes the little tabs break, sometimes not.

Man, scary scene at Fry's.
24 registers, only one open.
I was the only customer at Hamilton and 17, pretty sad.
I heard the fired everybody and are now using temp workers so they don't have to pay health care. :shock:
 

Similar threads

K
sanity check on cable capacitance and passive ribbon mic
2
Replies
20
Views
2K
Marik
M
T
What are my next tools?
2
Replies
21
Views
1K
Gold
Gold
O
Proper Cable for Console Power Supply
Replies
4
Views
614
Ohdonnymon
O
Z
An attempt making singlesided Opa Alice and Opic Pcb. Need Your Help.
Replies
6
Views
660
rogs
rogs
thor.zmt
Are there things that can be addressed in older circuits to modify them to deal better with the wireless routers and such?
Replies
8
Views
1K
thor.zmt
thor.zmt

Latest posts

Back
Top