fabio's neve output board

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

skal1

Well-known member
Joined
Jun 4, 2008
Messages
1,282
Location
Birmingham,uk
Hi everyone

i built this board a couple of months back, and i could never find the psu schematic to power two of these .


1}Is their a standard psu for this board

2)What is the mains transformer spec eg: volts, amps


here is the circuit below

Thank you in advance

http://s51.photobucket.com/albums/f392/skal34/?action=view&current=dr-1.jpg


regards

skal1
 
Hello!

Madriaanse is using the JLM PSU for 2 of his 1290 preamps!
Since there is one more amplifier board in his preamps the jlm PSU should have enough power for yours.

Hope this helps!

regards,
Wolfgang
 
Dan Alexander has Neve documents including one with module specs...
check his website.
Don't forget to add a-bit for relays led's a DI or whatever you might need. 500ma sounds like plenty.
Sleeper
 

Latest posts

Back
Top