I'm looking for info on the API 302-t2 transformer, if anyone has ever heard of one. Looks to be an output transformer as its mounted on a UAC-1 card. That one is another mystery to me! The card has a Melcor opamp and appears to be an early product of API. Thanks for helping me out.
Any info on an API 302-t2 transformer
- Thread starter jrfred453
- Start date
Help Support GroupDIY Audio Forum:
I did buy the ones on eBay. Was hoping to just hook a 312 type input transformer to these things via the JLM Go Between Plus. I haven't been able to find any info on these things yet though.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=270295863799
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=270295863799
Walrus
Well-known member
From John Klett's website....
http://www.technicalaudio.com/reading/apilistmostlyoldmodelnos.html
AP302T2 Output (75 to 150/150 +30dBm) - open frame pcb mount.
Looks like that is the same one.
http://www.technicalaudio.com/reading/apilistmostlyoldmodelnos.html
AP302T2 Output (75 to 150/150 +30dBm) - open frame pcb mount.
Looks like that is the same one.
I'm still trying to figure out what is going on with these cards. Of coarse the components on each card are different. I was hoping to go for a 312 type preamp. Seems like it should be easy enough but is it possible while using this transformer? The transformer has 6 pcb mount pins all numbered. By the looks of it
1 is ?
2 is connected to COM
3 is ?
4 and 5 are connected
6?
Any ideas?
1 is ?
2 is connected to COM
3 is ?
4 and 5 are connected
6?
Any ideas?
nielsk
Well-known member
1 signal in 3 & 6 out....
Similar threads
