The Eyeballing Game

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Larrchild

Well-known member
Joined
Jul 15, 2005
Messages
806
Location
Fort Lauderdale, Florida
http://woodgears.ca/eyeball/index.html
This is a cool test for those of us that drill the occasional chassis by eye, lol.
I scored a 5.2 last time, but I'm getting a little better as I repeat it.

 
I did well on the circles and the "bisect the angle" which were down to 0.4 !!
Overall I did quite badly - on just one attempt so far 8.2  !!
Even when I mark holes with proper tools they "drift" whilst drilling :-(

MM.
 
I'm getting worse! Managed 3.05 first time, the 3.11, then 4.8...

Maybe I need more coffee
Or less.
I certainly need to get a life!
 
What have you done to me, Larry? I've always accepted the fact that I'm a geek, but this is off the scale. They should rename it 'The Anally Retentive Game'.

Sheesh... My best is 0.1 on the right angle.


Justin
 
2.95 is my best of 3.  I started at 3.85.  My 2nd round I dropped the mouse by accident and scored a 9 something.  Ironically when machining, I'll make a mistake equally as bad so I consider this an accurate simulation on many levels.

-Richard
 
5.19 first time.  I do pretty well on most of them, but the one where you have to find the center of the triangle screws me every time.  Which is your worst one?
 
Back
Top