Valve Compressor with internal "Crush 'n Blend" ?
« on: November 19, 2008, 10:01:43 PM »
Is this do-able ???

Luv the DAOC (analag and kubi versions) - frigged about with wet/dry mix  :P and wonder if possible to include "blend" internally "in the box"?
Could/should imagine having a valve buffer from input stage (another srrp stage/transformers etc?) or is it better to do it SS "out of the box"
Don't mind "a bit" of extra circuitry but beats frigging about with extra patch leads ;).
Guru's advice much appreciated :D

making better music!


Re: Valve Compressor with internal "Crush 'n Blend" ?
« Reply #1 on: November 19, 2008, 10:12:10 PM »
You're asking about an internal "direct/compressed" mix control?
It could be done if you don't mind the extra circuitry. I'd be more inclined to do it externally with a mixer, even if it's just a straightforward two-input mixer made especially for the task.


Re: Valve Compressor with internal "Crush 'n Blend" ?
« Reply #2 on: November 20, 2008, 11:19:23 AM »
Don't know if it's up to spec on a serious valve compressor,
but I just designed one based on Keef's crush-n-blend that
goes "in the box". It is based on simple 5532s, might make
one more around the OPA 2134 later.

You can dig it up in the original crush-n-blend thread.


Quote from: emrr
F-in' hook some Sh*t up and see if it catches on fire
Living Note Studio


Related Topics

  Subject / Started by Replies Last post

Started by SSLtech « 1 2 ... 9 10 » Drawing Board

182 Replies
Last post July 31, 2014, 03:42:25 PM
by junkface
3 Replies
Last post August 17, 2008, 11:15:45 PM
by Sleeper
15 Replies
Last post May 22, 2014, 02:08:33 PM
by kante1603
46 Replies
Last post April 28, 2014, 09:48:49 AM
by MaNiAC