Hi people!
I have all three projects on same stage: tested, fix some traces and order PCB's.
BOM, support, etc. like on 33609 or Sontecs.
As normal Russian guy, I LUV Christmass...than, it should be something good for this reason!
There's some factors, as fun, crazy, use and price.
Options are:
-PGA2500 based preamp- Wiregain-DC, digitally controlled, VERY clean, etc...:
http://www.groupdiy.com/index.php?topic=30506.0
http://www.groupdiy.com/index.php?topic=2148
One complete pre estimated parts cost (w/o power supply and box): ~$90-120
-2254c-2254 soundpath, compressor's sidechain from 33609, sidechain switchable HPF:
http://www.groupdiy.com/index.php?topic=29977.0
See 33609 tread as well:
http://www.groupdiy.com/index.php?topic=26218
One channel's estimated parts cost (w/o power supply and box): ~$350-400 (depends on trunny's)
-Controll room module-relay based, uP-controlled, balanced, passive,
4 inputs/2 SPK outs + sub, TRIM offsets on every in/out, 64 steps of 1 dB (actually, 63 and CUt),
talkback/dim/mono....
A simplified version of my mastering console's monitor section...
It has 2 separated boxes, controll and audio, connected with VGA cable (up to 15m).
Some info here:
http://www.groupdiy.com/index.php?topic=14474.40
http://www.groupdiy.com/index.php?topic=17757
http://www.groupdiy.com/index.php?topic=30419
Controller's front pannel layout:
http://i251.photobucket.com/albums/gg291/diy33609/plexi_contr_small_F.gif
Complete unit estimated parts cost (w/o power supply and box): ~$350-430
Winner will be offered as Christmass DIY Project in my sticky:
http://www.groupdiy.com/index.php?topic=29771
and, if there will be enough people, as allways, we will design and offer cases with Purusha.
Please write here your wishes, oppinions and preferences.
I have all three projects on same stage: tested, fix some traces and order PCB's.
BOM, support, etc. like on 33609 or Sontecs.
As normal Russian guy, I LUV Christmass...than, it should be something good for this reason!
There's some factors, as fun, crazy, use and price.
Options are:
-PGA2500 based preamp- Wiregain-DC, digitally controlled, VERY clean, etc...:
http://www.groupdiy.com/index.php?topic=30506.0
http://www.groupdiy.com/index.php?topic=2148
One complete pre estimated parts cost (w/o power supply and box): ~$90-120
-2254c-2254 soundpath, compressor's sidechain from 33609, sidechain switchable HPF:
http://www.groupdiy.com/index.php?topic=29977.0
See 33609 tread as well:
http://www.groupdiy.com/index.php?topic=26218
One channel's estimated parts cost (w/o power supply and box): ~$350-400 (depends on trunny's)
-Controll room module-relay based, uP-controlled, balanced, passive,
4 inputs/2 SPK outs + sub, TRIM offsets on every in/out, 64 steps of 1 dB (actually, 63 and CUt),
talkback/dim/mono....
A simplified version of my mastering console's monitor section...
It has 2 separated boxes, controll and audio, connected with VGA cable (up to 15m).
Some info here:
http://www.groupdiy.com/index.php?topic=14474.40
http://www.groupdiy.com/index.php?topic=17757
http://www.groupdiy.com/index.php?topic=30419
Controller's front pannel layout:
http://i251.photobucket.com/albums/gg291/diy33609/plexi_contr_small_F.gif
Complete unit estimated parts cost (w/o power supply and box): ~$350-430
Winner will be offered as Christmass DIY Project in my sticky:
http://www.groupdiy.com/index.php?topic=29771
and, if there will be enough people, as allways, we will design and offer cases with Purusha.
Please write here your wishes, oppinions and preferences.