hello. anyone know if it is possible to wire the Tamura GA81720 as 1:2 or 2:1? I know that they are used as 1:1 600ohm in the pm2000, but it looks like there might be a center tap (can bee seen here: http://www.groupdiy.com/index.php?topic=30325.msg368823#msg368823 )
Tamura GA81720 - wiring for different ratio?
- Thread starter outoftune
- Start date
Help Support GroupDIY Audio Forum:
mitsos
Well-known member
- Joined
- May 4, 2007
- Messages
- 2,886
(I think) You can tell by measuring resistance across the winding. Measure from end to end of the winding and then measure from one end to the center tap.. You should get about half the resistance (At least that's what I get on an Edcor I have right here).
