substitute
Well-known member
The various dials are a little confusing to me...
-hpf is pretty obvious
-stepped attenuator is as well, but what does the dial inside the knob do?
-and how bout the "attenuator" on the bottom
I guess I'm not sure how they all work together.
Also, regarding racking them up, if some one could verify/clarify my understanding of the pin out that would be great.
pin 1 + input
pin 2 - input
where does the shield connect?
Jumper 3 and 4
pin 19 + output
pin 20 - output
again, where does the shield connect?
Jumper pins 22 and 23
The power connections are a little confusing to me. The schematic has two versions, one with pin 29 as -24v and one with 0v
pin 31 +24
pin 30 ground
THANKS
-hpf is pretty obvious
-stepped attenuator is as well, but what does the dial inside the knob do?
-and how bout the "attenuator" on the bottom
I guess I'm not sure how they all work together.
Also, regarding racking them up, if some one could verify/clarify my understanding of the pin out that would be great.
pin 1 + input
pin 2 - input
where does the shield connect?
Jumper 3 and 4
pin 19 + output
pin 20 - output
again, where does the shield connect?
Jumper pins 22 and 23
The power connections are a little confusing to me. The schematic has two versions, one with pin 29 as -24v and one with 0v
pin 31 +24
pin 30 ground
THANKS