question about hooking up the Sifam light kit for a drip electronics PCB LA2A

Bill Kahler · Jan 12, 2009

The Sifam light kit is 6V 1.2W. I have a 6.3 connection for the main power lamp. Is this where I would also hook up power for the light kit? Seems like a resistor should be in there to drop the voltage a bit - or not - since it is going to the other lamp as well. Thanks in advance for the help.

Stagefright13 · Jan 13, 2009

Check here Gyraf explains the math simply.

http://www.groupdiy.com/index.php?topic=275.0

Bill Kahler · Jan 13, 2009

from Gregory:

if it's a 6v lamp

your fine ,

there is a pair of pads on the pcb that say 'lamp' those are 6.3v AC .

hook it into there,

question about hooking up the Sifam light kit for a drip electronics PCB LA2A

Help Support GroupDIY Audio Forum:

Bill Kahler

Member

Stagefright13

Well-known member

Bill Kahler

Member

Similar threads

Latest posts

question about hooking up the Sifam light kit for a drip electronics PCB LA2A

Help Support GroupDIY Audio Forum:

Bill Kahler

Member

Stagefright13

Well-known member

Bill Kahler

Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!