1176 pics from board mnats revj...

Hi guys!!
I 'm begin to solder and I'm asking question....
I'm bulding dual 1176....
And I search to learn how to matching fet? I know that question is often post....
But for stereo dual units, which fet Only bf245a? we must have  to match Q1 and Q10 for each boards?
And what value can we read?
Because in axl
http://www.axtsystems.com/index.php?view=article&catid=34%3A1176ln&id=46%3A1176lnfets&option=com_content&Itemid=62
He's not describe how to match fet in mnat's bom? (bf 245a)
Thanx

PS: I'm asking question about 1.0F capacitor, I used wima ( in red on pic) do you think it's ok?
I find it very very smal according to apart on board....?

c'est beau ;D

dont wory about the cap sizes, theres a few spacings to allow for a miriad of choices, think i used orange drop but cant remember off hand.

if you want to use these in stereo, then you need to match both sets of fets. all 4 need to be as near as poss to each other. was going to go the dual route, but as these things sound so good on general rock didnt bother trying to get them stereoed.

Iain

like the build

thx lofo for your response...
I've try to match fet...
And I post new pics as soon as possible...