Re: M-Audio Delta 1010 Output-Stage
« Reply #20 on: May 04, 2009, 06:26:16 PM »
Hey folks, I'm the FNG here. I've had my Delta 1010 for quite a while, and I'm very happy with it. I have my 1010's output sent to a headphone amp, and then it daisy chains to my studio monitors. My monitors are active, and I usually leave them off. A few days ago, it developed a bit of a hum in my headphone amp. When I turned on my monitors, the hum was really loud! I unplugged everything from my 1010, and plugged one monitor into each output. The noise is on all 8 analog outputs, but it does not appear to be on the inputs.

I haven's seen a complete schematic of the unit to know how the outputs tie together so that the hum will be on all of them. If anyone can help me out, it would be greatly appreciated.

Robin F.


PRR

Re: M-Audio Delta 1010 Output-Stage
« Reply #21 on: May 06, 2009, 01:48:35 AM »
Hum everywhere is often a failed main power cap.


 

Related Topics

  Subject / Started by Replies Last post
0 Replies
1056 Views
Last post October 29, 2008, 08:11:21 PM
by ENS Audio
34 Replies
12177 Views
Last post March 20, 2009, 03:26:51 PM
by dmills
8 Replies
6043 Views
Last post May 27, 2009, 12:29:36 PM
by signorMars
Delta 1010...

Started by abechap024 « 1 2 » The Lab

33 Replies
7526 Views
Last post July 16, 2011, 03:36:21 PM
by abechap024