D-LA2A Support Thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Anyone have 4 x 1N4141 switching diodes spare ??

Missing from my parts order for this :-(

Would be a great help, I can pay or swop something ?

Cheers,
Martin.
 
sonicwarrior said:
MartyMart said:
Anyone have 4 x 1N4141 switching diodes spare ??

The BOMs I have say that you can use standard 1N4148 for these.

Ah, OK when I looked them up in the data sheet they were like a BIG 1N4007, 100v 3watt !!

I have hundreds of 1N4148, perhaps they are used in the bypass relay board then.

I just screwed up by ordering loads of parts that I have already from 3 years ago !  DUH !
Will have to use them on an additional single La2a, or sell them on.

That's what happens when you move house and have stuff buried in boxes !

M.
 
Is this Omron G5V-2 relay correct ?

Thanks, Marty.

150173171.jpg
 
bernbrue said:
ho, ho, Marty is just back an already infected !! 8)
regards
Bernd

I know, I went from "Zero to Hero" in about 5 days !!!!

No, just trying to sort through parts, find what I have and what I don't have, just found that i repeated my
Farnell order for the DLA2A !  ... now have almost enough parts for 2 x !!

Well, many things can be used else where so it was only about a €40 mistake.

Thanks Bernd & Volker for the continuing friendly help :)
You ROCK.
M.
 
OK, struggling with my German and the RS site for Molex KK, which I know nothing about !

Found the 2,54mm headers in 2 and 3 pole  ... good

Have choice of either "Crimpgehause" OR "Ansclussgehause" for the 2/3 pole connectors to the leads ??

Which is correct/best and what is the name of the "crimp pins" that are needed ... is that all ?

I thought that I saw 5 pole and 8 pole headers on the drawing as well next to the traffo's!!

I wish these companies would offer header/ top / pins all together, why separate them ??

THX, Marty.
 
I've found it a bit difficult to shop for the right ones, too. Until I found futurlec, they only have the bare essentials and very cheap.

Here's your one stop link: http://www.futurlec.com/ConnPolHead.shtml
 
Kingston said:
I've found it a bit difficult to shop for the right ones, too. Until I found futurlec, they only have the bare essentials and very cheap.

Here's your one stop link: http://www.futurlec.com/ConnPolHead.shtml

OK, I'm with you but that's from the US of A and I have an RS account with free delivery.
Does that mean that I need a HUGE order or suffer some massive postal fees that make it a "no no" ?
( your experience required )
RS are 4 x as much in cost BTW !!

Oh and any idea on the AC connections, 3.92mm or 5mm ?
M.
 
MartyMart said:
OK, found EU ship rate is reasonable and there's no minimum order :)
M

Indeed. They are Hong Kong based if I remember right, lot's of other handy stuff they got too, usually significantly cheaper than elsewhere.

[edit]

MartyMart said:
Oh and any idea on the AC connections, 3.92mm or 5mm ?

http://www.futurlec.com/ConnTerm.shtml
 
Kingston said:
Indeed. They are Hong Kong based if I remember right, lot's of other handy stuff they got too, usually significantly cheaper than elsewhere.

http://www.futurlec.com/ConnTerm.shtml

Thanks Michael, got 'em , done , ordered several types for a couple of other projects while I was there.
Some pots also, 28 bucks and 4 postage :)
Quick calculation and RS was just over twice the cost !! WTF.

Thanks all for chipping in, now I have 100 molex connections to trim, crimp and solder !!!! :-(

( that's the part where I would pay someone else to do it !! )
 
bernbrue said:
Hi Marty,
I bought these. Quite cheap and ready to go.
http://www.musikding.de/Wire/PCB-connectors:::163_158.html
regards
Bernd

AH .... BUM, would have gone for that, pre-wired that is pretty cheap !!

I might try a few and see how they are, any problems with 'em ??

Thanks B.
 
Back
Top