I'm testing out a G-Pultec filter section before I build the amp section. I started with a Triad HS66 input transformer wired 1:1 with a 620 ohm resistor across the secondaries running the output direct into my system. With the a balanced input and the transformer in place, the filter doesn't work at all (driven by a SCA A12). When I wire it unbalanced in without the transformer it works fine. I read a couple of threads about folks with similar problems, but haven't found any situation like mine. Anyone have any idea where I could be going wrong?
Thanks for the help,
Craig
Thanks for the help,
Craig