Slime_Lord

Re: Barry Porter "Net EQ"
« Reply #540 on: January 23, 2021, 03:36:45 PM »
All four of the bell sections are the same except for the component values. The low mid sections should behave the same way as the other bands.

I’ve gotten behavior like that when I’ve miswired a switch or two. I’d compare the low mid sections to a working section. Double check component values and connections.

Good point, I’m taking it out of the case tonight and will check my wiring, it’s entirely possible I made the same error twice  ;D

EDIT:  Had a 100K resistor at R100 on both boards, switch it to 10K per the schematic and now everything is working as it should!  What a great EQ!
« Last Edit: January 23, 2021, 08:31:14 PM by Slime_Lord »


r2d2

Re: Barry Porter "Net EQ"
« Reply #541 on: February 18, 2021, 07:42:21 AM »
Thanks a lot.

… "it" say : expired    :(
..... Cracking D.Vader Firewall ...  II-)

r2d2

Re: Barry Porter "Net EQ"
« Reply #542 on: February 18, 2021, 08:26:25 AM »
Hi All,

I have gerbers for Barry's own PCB design as well as a PDF outlining the circuit.  I don't have the means to host the Gerbers so I put them up on yousendit - perhaps someone can download and host.  I don't know if they are good or not as I have neither the skills nor the Gerber reader to tell.

https://download.yousendit.com/WnBReFlZYXkzMWwzZUE9PQ

Can whoever ends up hosting this let me know and I'll email them the PDF of the circuit description.

Cheers,
Ruairi

edited for many typos - too tired. Will email to the GroupDIY account later

Hi Ruairi
any chance for a file re-up ?
thanks
..... Cracking D.Vader Firewall ...  II-)

Re: Barry Porter "Net EQ"
« Reply #543 on: March 26, 2021, 10:18:06 AM »
Hi All,

I have gerbers for Barry's own PCB design as well as a PDF outlining the circuit.  I don't have the means to host the Gerbers so I put them up on yousendit - perhaps someone can download and host.  I don't know if they are good or not as I have neither the skills nor the Gerber reader to tell.

https://download.yousendit.com/WnBReFlZYXkzMWwzZUE9PQ

Can whoever ends up hosting this let me know and I'll email them the PDF of the circuit description.

Cheers,
Ruairi

edited for many typos - too tired. Will email to the GroupDIY account later
hi, do you still have those gerber files? Can you share it to me? Thank you


 

Related Topics

  Subject / Started by Replies Last post
24 Replies
11896 Views
Last post January 27, 2005, 08:22:27 AM
by rafafredd
13 Replies
8909 Views
Last post June 25, 2010, 04:26:18 AM
by livingnote
2 Replies
928 Views
Last post August 29, 2019, 05:11:14 PM
by leitmo
6 Replies
942 Views
Last post June 19, 2020, 08:10:32 AM
by andow