APP Studio Ing's products - APP992 - APP14GE Germanium DOA and other kits

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
ppa said:
Scuse me for the time, but I am yet waiting the epoxy resin to pot your opamp and other 40.
however these 4 are new SMD version using panasonic metal film resistors in the signal path (very very good resistors), and this nwe version sound much better than the previus. It has a very realistic guitar, for example, with realistic ultra fast transients. Sorry, they need another week to send them.
For Makeup gain you could use a 325 api clone or, if you want, an APP1040 board without input trasformer using its DI input.

No problem for the delay, we have the new version;)
it's a good news.


For the makeup amp, i looking for something close to the original pultec EQPA3 schematic.
I search on the web but i don't find any schematic of this circuit.
I like to use the minimun of components for this amp.
I not sure is the better option because it's the first time i use DOA.
But i like to experiment and learn.
 
Hi PPA,

What would the total price be for 10 LED metering boards and 4 power supplies shipped to the UK. I would be paying by PayPal.
Many thanks,

Frank
 
Hi Frank,

10X Meter2 PCB's= 6.5x10 = 65 eur

4x PSU2 PCB's = 6x4 =  24 eur

S&H to UK with registered mail service = 8 eur

----------------------------------------------
TOTAL    97 eur  

thanks
cheers
Pier Paolo
 
Hi paypal sent thank you.
On paypal I've asked for 2 PSU boards, it should be 4 as per your quote.
I made the mistake because I'm thick.


Frank
 
Hi Paolo !
don't know if your first name is much paolo or pier,
i guess it's paolo ;-)
i would like to know how much is shipping to France
for 6 PSU pcbs,
and if you have them in stock cause i need them soon,
regards,
francois
 
My full name is Pier Paolo, my surname Abbate.

my family call me Paolo (Paul in the english countries), some my friends Pier Paolo, some Paolo and some Pier.

the shipping costs are 8.5 eur using registered mail because 6 pcs weigh 160 gr.. Poste italiane are less cheaper than France post as many things in France.
The priority mail is not tracked, it has not invoice, and costs only 4.5 eur but I don't council it.
These PCB's are 2 mm of thickness and FR4 vetronite with 70um of copper thickness so they weigh a bit (are made in Italy)
I have the boards available and ready to send out.

thanks
cheers
Pier Paolo
 
ok for registered shipping and 6 boards,
Is paypal possible ?
If so what's your paypal adress please ?
or you can send me an invoice using the email function.
best regards,
Francois
 
HELLO!
here my new preamp-DI  done with  ppa1040 board,ppa2050,EA transformers,ppa PSU
sound fantastic,very clean,lot of gain....
thank you  Pier Paolo
i am working on a new one with ppa germanium DOA and lundahl on input
very god job!! ;D
dingo.
Picture111.jpg

Picture118.jpg

Picture103.jpg

Picture113.jpg
 
APP STUDIO ING. PSU2 ,  CONFIGURABLE PSU BOARD KIT

Hi can you tell em what the LED channels of the PSU board kit are capable of kicking out please...?

Brendan.
 
Hi Paolo,
payment sent with paypal for 6 PSU2 pcbs with registered shipping,
best regards,
francois
 
brennyb said:
APP STUDIO ING. PSU2 ,  CONFIGURABLE PSU BOARD KIT

Hi can you tell em what the LED channels of the PSU board kit are capable of kicking out please...?

Brendan.

Hi Brendan,

the LED+ and LED- points are for the power LED to indicate that the power is just on. This out can used to drive several LED's soldering a wire in place of R7. With this wire LED- will be connected to GND, and considering that LED+ is connected to +Vcc out, it's possible having a second connector (LED-,LED+) to supply DC power to the LED's , but, it's important, each LED must be have its current limiting resistor. 

regards
Pier Paolo




 
pacemaker said:
Hi Paolo,
payment sent with paypal for 6 PSU2 pcbs with registered shipping,
best regards,
francois

thanks Francois,

I'm just going to do your parcel.

regards
 
Hello "PPA"
please the psu kit include all parts needed ?
capacitors are "low esr" ?

peace
 
Back
Top