Pad on an unbalanced line?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

3nity

Well-known member
Joined
Dec 30, 2005
Messages
3,637
Location
MTL, CANADA
lpad.jpg

would a schem like this work as a pad on an unbalacned line??
Thanks..
 
a simple on-on (SPDT) switch will do.

1. disconnect R2 from "Out" and R1.
2. One end of the SPDT switch to "In", other end to the now disconnected R2. middle of the switch goes to out/R1.
 

IN--+--/////--+--OUT
    |        |
    o        |
      o------+
    o /
    |
    /
    /
    /
    /
    |
    _
  GND

I hope this is clear enough.
 

Latest posts

Back
Top