pultec knobs... WTB:bypass switch, ugly fuse holder? 0:-)

Hello!

I tried to search some of the nice original looking pultec knobs some time ago... I have some dakaware knobs (boost atten...) and those on/off knobs and atten sel knobs...
The only missing knob is the cool rectangular knob for frequency



A group member told me about the caltronix website... http://www.caltronix.com/
They have a very cool knob in the catalog:
http://www.caltronix.com/catalog/cat89.htm

I tried to contact them.. but they only have distributors in the US.
There is no minimum order and they told me they would ship to germany.
They gave me the prices but after ordering I haven't heard anything from them. I asked about the shipping costs etc... But no reply.

My question is... has anyone ordered these knobs yet?
Or has the ability to send/sell some? :roll:

Here is a distributor list:
http://www.caltronix.com/distributors.htm

Or does another supplier have these knobs in stock?

Kind regards,
Frank.

http://www.nrgrecording.de/html/pultec_knobs.html

Frank,

How many are you looking for? I need some of those also, I'll try to order them and I'll send you some if that's easier for you.

[quote author="jrmintz"]Frank,

How many are you looking for? I need some of those also, I'll try to order them and I'll send you some if that's easier for you.[/quote]

That would be greeaat! :wink: I would like to have 20 pcs or so.
The part no is "50-151" price is $3.08 each. (thats what Mike Throughton writes to me before I didn't get replies to my mail) ([email protected])

Regards,
Frank.

Hi Frank,

OK, I'll follow through and see if I can get their attention.

:thumb: :thumb:

:green: :green: :thumb: :thumb:
THANKS!

I have six I found at a surplus store and was planing on holding on to them. However If You REALLY want them I can let them go.

If looking for old knobs one should check this place out.

http://www.leedselect.com/parts-knobs.html

So much cool stuff.

Thanks nacho459! As Iam thinking about making 5 pultecs I'll wait and look what jrmintz can achieve. But.. very nice suggestion! :thumb:

Very cool website MikeKensington! Thanks for that! :thumb:

Frank.

here are a couple of other knob and other goodies sources i saw at aes:

http://www.cliffuk.co.uk/
http://www.kilointernational.com/index.html

nice focus, ehh?

Thanks chris. New links :wink:

I'd seen the cliff stuff at musikmesse frankfurt germany... nice things. But I think thats not diy-friendly because i feel that they're selling only in bigger quantities?
I think I'd seen "cliff uk" inside of bäh*ringer stuff.

KILOs ML series looks like the knobs of the studio electronics urei. :wink:
http://www.studioelectronics.com/images/popup/TheMightyC2s.jpg

Frank.

Frank;
Thanks for the link.
But I am 100% sure they are the Dakaware knobs.
Exact same catalog page.
I cannot find that old info as it is on the old group.

Hey they are cheaper than I remember!

HA!

that round purple knob on the right in the kilo photo was designed for my console!

dave

Cool.
Now i have all knobs. :green:
Today i was in a studio to check which colour is near to the original with those colour charts available from building centers.
So if "Hornbach" is your next building center try to use: SO.20.40. The nearest RAL Colour seems to be "azure blue RAL5009.

Does anyone know a supplier for these oldscool bypass switch or the ugly fuse holder? :?





soundguy: which console? :shock:

ahem...
someone sends a PM... but my inbox folder was 100% full... so the message was deleted... please mail again! (or use my email adress) Thx. :wink:

very nice frank

are that all limited nos knobs, or is there a supplier,
where I can get them..??

mat

Hi Matthias.

I'd done a small list with links.
The on/off and atten sel. knobs are dakaware from www.mouser.com. The big dakaware knobs (boost/atten) were used but in good condition...with a little work they looks like new. The frequency knobs are from calltronix, but they didn't answered to my mails, so Seth (jrmintz) was kind enough to order some for himself and me and send them to me. Thx Seth! I love them. (i think they are the same as tubetech uses)

Here are some pix of the refreshing procedure:
http://www.nrgrecording.de/html/knobsrefreshing.html






PULTEC EQP KNOBS



Box 1:
(1x BANDWIDTH, 2x BOOST and ATTEN)


Manufacturer: Dakaware
(knobs are also known as collins radio knobs)

Source 1:
http://ampex.hughescatalog.com/electronics/dakaware/dakaware.html
contact: John Hughes [email protected]

Source 2:
http://www.surplussales.com/ShaftHardware/Knobs-2.html 29$ each!! :-( (used)




Box 2:
(1x ATTEN SEL)



Source 1USA)
Manufacturer: “Davies Molding”
Source: www.mouser.com
Part Nr. 5164-2300A 1,29€

Source 2Germany)
www.musikding.de
Chickenhead 31mm 1,30€





Box 3:
(BYPASS SWITCH)





Box 4:
(2x FREQUENCY SWITCH)



Source 1: (USA)
Part Nr. 50-151 3,08$

http://www.caltronix.com
http://www.caltronix.com/catalog/cat89.htm << catalog site

http://www.leedselect.com/index.html
http://www.leedselect.com/Images-knobs/Superior_type10.JPG



Box 5:
(FUSE)



Box 6:
(JEWEL LIGHT)



Source 1: (germany)
www.tubetown.de

“feje-r - Fender Jewel red” 2,70€



“felh01 - Fender Lamp Holder” 2,25€






Box 7:
(ON/OFF SWITCH)


Source 1: (USA)
Manufacturer: “Davies Molding”
Source: www.mouser.com
Part Nr. 5164-1400 0,95€

Source 2Germany)
www.musikding.de
knob with nose 13mm 1,00€





Or just look here:

http://www.nrgrecording.de/html/pultec_knobs.html

Excellant! Thanks!
You might try a little turtle wax after polishing just for the heck of it.

Fuse:

You may want to try this

nrg, can I steal that info for my Pultec web page?
cj

[quote author="cjenrick"]nrg, can I steal that info for my Pultec web page?
cj[/quote]

Of course cj! Please do. :wink: