Need Shep/Neve 31105/8078 schematic and/or pinout

Advertise with us
shop deals on amazon
Shop deals on ebay
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
E

Emperor-TK

Well-known member
Joined
Jul 14, 2004
Messages
1,076
Location
NJ, USA
I have a Shep/Neve 31105 module here that I'm trying to fix a dead mic amp on (line input works OK).  Does anyone have a schematic or a connector pinout that they can share?  I can't find one on Google.

thanks,
Chris
 
Also, if anyone knows the the voltage fed to the board would help too so I can start probing.  From poking around, it looks like a single rail power supply.  Would it be safe to just feed it +12v and start tracing my signal input?
 
Emperor Tomato Ketchup said:
Also, if anyone knows the the voltage fed to the board would help too so I can start probing.  From poking around, it looks like a single rail power supply.  Would it be safe to just feed it +12v and start tracing my signal input?
Click to expand...


You can find a bit of tech info on the 311xx series here.

http://www.audio-toyshop.co.uk/Tech_Archive/tech_archive.html

I believe they are +24 volt like the 10xx series.

Mark
 

Similar threads

S
NEVE 31105 schematic
Replies
4
Views
515
Sidebstudio
S
ADaddy
NEVE V3 documentation? Any diagrams?
Replies
13
Views
3K
musgrave
musgrave
C
Needing the pinout for a 12-pin Quad Eight AM-4 OP amp
Replies
3
Views
480
CalavoBob
C
T
FBT M12X4 preamp - service manual or schematic needed
Replies
12
Views
406
tedsorvino
T
H
Barth U211 Schematics needed
Replies
0
Views
378
helical
H

Latest posts

Back
Top