Pages: [1]

zachs

4 Channel Neve EZ1290 Finally Completed!
« on: August 24, 2009, 07:05:49 PM »
This has taken quite a long time, only thanks to me... it's actually been done for probably a year, I just never finished up the faceplate and the finishing touches. Saw it sitting in the garage so lonely, so I took a few hours and finished her off. Huuuuge thanks to madriaanse for all of his work and help on this project, it's amazing.

This was my first real DIY build, and I really tried hard to keep the wiring/insides as clean and neat as possible, I think I did a great job on it.

Madriaanse 1290 Neve Boards
All parts to his exact specs
JLM Go Betweens for Phase/Pad/Phantom
4 Pin XLR for external power
Neve-ish knobs from Phoenix Audio I got a while ago.
I painted a blank front panel in some Neve-ish blue I found at the hardware store.







« Last Edit: November 01, 2010, 03:27:05 AM by zachs »
Logged

ChrioN

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #1 on: August 24, 2009, 07:37:04 PM »
wow! looks great! do you remember how much you paid for one of those knobs?
Logged
"All PCB traces are curved to emulate the electrical response of point-to-point wiring" -Drip

Whoops

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #2 on: August 24, 2009, 10:19:13 PM »
Looks very nice,

great Work!!!
Logged

skal1

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #3 on: August 24, 2009, 10:46:49 PM »
yes my friend ,very nice well thought out. i bet they sound sweet.


skal1
Logged

deuce42

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #4 on: August 24, 2009, 11:32:40 PM »
Good for you. I hope you have many awesome recording sessions with it.
Logged

diyfanatic

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #5 on: August 25, 2009, 03:34:22 AM »
great built!!!!

Quote from: ChrioN on August 24, 2009, 07:37:04 PM
wow! looks great! do you remember how much you paid for one of those knobs?
same question here...
Logged

SNG

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #6 on: August 25, 2009, 03:49:07 AM »
Quote from: diyfanatic on August 25, 2009, 03:34:22 AM
great built!!!!

Quote from: ChrioN on August 24, 2009, 07:37:04 PM
wow! looks great! do you remember how much you paid for one of those knobs?
same question here...
Me too and where did you get them from?
Logged
my wife don't care I build all the stuff, she is using it... :D
building now a 32 channel analog console with the features I like and miss in many consoles :)

diyfanatic

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #7 on: August 25, 2009, 04:24:53 AM »
Phoenix Audio
Logged

SNG

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #8 on: August 25, 2009, 04:30:52 AM »
Quote from: diyfanatic on August 25, 2009, 04:24:53 AM
Phoenix Audio
Sell they the knobs then seperatly?
On their website I see only complete made products and no kits or parts...
Logged
my wife don't care I build all the stuff, she is using it... :D
building now a 32 channel analog console with the features I like and miss in many consoles :)

mrclunk

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #9 on: August 25, 2009, 05:17:47 AM »
nice, very tidy.  I like the utilitarian design ;D
Whats the battleship grey colour you used?
Logged

Ptownkid

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #10 on: August 25, 2009, 07:53:40 AM »
Beauty Vern!!!
Logged

hobiesound

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #11 on: August 25, 2009, 07:59:37 AM »
what type of power supply are you using? Looks great!

greetings,

Thomas
Logged

zachs

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #12 on: August 26, 2009, 03:05:56 AM »
Thanks for the feedback so far everyone! Can't wait to use them, hopefully trouble free. Knobs like I said are Phoenix Audio, not sure what I paid or if he offers them these days, like I said I got them a while ago when he had some spares.

mrclunk: haha yea thanks... I think it looks nice though, who needs descriptions! Color is Rust-Oleum Outdoor Decor Satin Finish Federal Blue, beautiful color.

hobiesound: Using a JLM Power Station, 5 rails total, 1 pair for each set of boards, using a 4 pin XLR.
« Last Edit: November 01, 2010, 03:27:21 AM by zachs »
Logged

MartyMart

Re: 4 Channel Neve 1290 Finally Completed!
« Reply #13 on: August 26, 2009, 04:16:09 AM »
They look great - nice work !!

Marty.
Logged
"Success is the ability to go from one failure to another with no loss of enthusiasm"

zachs

Re: 4 Channel Neve EZ1290 Finally Completed!
« Reply #14 on: September 02, 2009, 02:46:29 PM »
Thanks again everyone, very pleased with these bad boys.
Logged

mata_haze

Re: 4 Channel Neve EZ1290 Finally Completed!
« Reply #15 on: September 02, 2009, 05:06:40 PM »
ME LIKE VERRRY MUCH!

Best,
Mattia.
Logged

1954U1

Re: 4 Channel Neve EZ1290 Finally Completed!
« Reply #16 on: September 02, 2009, 09:04:36 PM »
Thats one of the best looking front-panels I've ever seen.
Logged

zachs

Re: 4 Channel Neve EZ1290 Finally Completed!
« Reply #17 on: September 08, 2009, 05:06:18 PM »
Wow, thanks very much 1954U1 :)
Logged

a zombie

Re: 4 Channel Neve EZ1290 Finally Completed!
« Reply #18 on: November 26, 2011, 07:10:36 PM »
Wow, this is great.  Really nice job!
Logged
Pages: [1]
 

Related Topics

  Subject / Started by Replies Last post
2275 Replies
462737 Views 		Last post June 09, 2019, 12:48:52 AM
by dp
24 Replies
9500 Views 		Last post April 18, 2016, 04:35:24 AM
by EvLoutonian
EZ1290 finished

Started by Benny « 1 2 » The Lab

30 Replies
12611 Views 		Last post August 24, 2009, 04:49:23 PM
by Audiotronic
25 Replies
6318 Views 		Last post March 19, 2010, 01:40:40 AM
by JoleFIN