Powering a Neve 31099, same voltages and pinout as a 1073?

Shop deals on ebay
Advertise with us
shop deals on amazon
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ian

Ian

Well-known member
Joined
Nov 14, 2008
Messages
89
Location
Los Angeles
Just a quick question. Can I use a AMS neve 1073 rack to power my Neve 31099 channel? The 31099 is the same circuit as a 1073 except without the line input stage. I just wanted to make sure the voltages and pinout are the same before I power it on. I don't want to damage my precious Neve strip before I get to even hear it! Thanks!
 
Same question here, a few years later....

is it possible to power a neve 31099 or 31102 (without the line mod) using a 1073 rack? Any modifications needed?

Thanks in advance!
 
Power should be the same pins as long as the 31102 have the 18-way conector.
Inputs and outputs should be the same as well.
Its fairly easy to open up the module and trace the pin connections to input and output transformers to doublecheck.
 
Thank you so much for your fast response, Api! I really appreciate it.

best regards from Spain!

Alfredo
 

Similar threads

S
BAE 1073 Dual DMP PSU Question
Replies
3
Views
589
ruffrecords
ruffrecords
H
~250kHz pings from neve 1073 type line output stage
2 3 4
Replies
68
Views
4K
HenryL
H
H
Golden Age Projects Pre-73 PSU Schematic and Mods
Replies
16
Views
3K
drtechno
D
Strawtles
Tube amp power supply reduce voltage
Replies
18
Views
1K
rock soderstrom
rock soderstrom
T
Possible solder bridge causing short in Mic Pre
2
Replies
25
Views
906
RoadrunnerOZ
RoadrunnerOZ

Latest posts

Back
Top