New design API 525... UPDATE.. METAL IN..PCBs IN
« on: September 14, 2009, 12:04:02 PM »
Gents,
I've got a new design 525 that does away with most of the wiring. Only the pots and transformers need to be wired to the pcb.
Provision for a Lundahl 1540, or differential input.
Any interest?



Biggun.. http://lazpro.com/nu525big.jpg
« Last Edit: November 25, 2011, 09:17:47 AM by peter purpose »
http://www.lazpro.com
I reserve the right to not sell to idiots


[silent:arts]

Re: New design 525... Any interest?
« Reply #1 on: September 14, 2009, 12:59:22 PM »
cool Peter. any chance for a stereo link switch?

Svart

Re: New design 525... Any interest?
« Reply #2 on: September 14, 2009, 01:10:50 PM »
wow.  I'm interested
Welcome to the GroupDIY leper colony! when something falls off, we just replace it with a tube!
occupation: General Electron Mayhem

Alesis X2 information repository:
http://www.theopiumdenproductions.

Re: New design 525... Any interest?
« Reply #3 on: September 14, 2009, 01:21:35 PM »
cool Peter. any chance for a stereo link switch?

Sure... as long as the 120R resistor can be put between a pair of pin6s on your backplane.
http://www.lazpro.com
I reserve the right to not sell to idiots

Re: New design 525... Any interest?
« Reply #4 on: September 14, 2009, 01:24:26 PM »
Hi Peter,

I'm very interested.  I have the first generation ones but I've only stuffed the resistors - so I'd be interested in at least 2 of these updated boards.

Are they available yet?

CC

Re: New design 525... Any interest?
« Reply #5 on: September 14, 2009, 01:32:41 PM »
Are they available yet?

Not yet.... just checking interest at the mo.
http://www.lazpro.com
I reserve the right to not sell to idiots

briomusic

Re: New design 525... Any interest?
« Reply #6 on: September 14, 2009, 01:50:02 PM »
this might get me over my grief over the sold out forssell opticals....    ;)

only temporarily though!   8)

q: is this going to be a kit as the old one? after wrangling an iec connector into a cheap and bendy steel case, I promised myself today: the next 3 projects no metalwork .

SSLtech

Re: New design 525... Any interest?
« Reply #7 on: September 14, 2009, 01:51:09 PM »
Well, thrash me nadger and bottle me kippers!

-That looks fantastic!

-Bring one along to the knees up in November for me to assess with my own beadies, will ya!

Keef
« Last Edit: September 14, 2009, 01:52:51 PM by SSLtech »
"A waist is a terrible thing to mind"
Quote from: PRR
Ah, but that was 1999; we don't party like that any more.

Re: New design 525... Any interest?
« Reply #8 on: September 14, 2009, 02:29:10 PM »
Roger roger keefypoo.
http://www.lazpro.com
I reserve the right to not sell to idiots

Re: New design 525... Any interest?
« Reply #9 on: September 14, 2009, 02:29:51 PM »
q: is this going to be a kit as the old one?

If there's enough interest.
http://www.lazpro.com
I reserve the right to not sell to idiots


ultra-alex

Re: New design 525... Any interest?
« Reply #10 on: September 14, 2009, 03:00:53 PM »
oh yes, i´am interested!!!  ;D

edit: a pair of course...
« Last Edit: September 15, 2009, 05:19:33 AM by ultra-alex »

kazper

Re: New design 525... Any interest?
« Reply #11 on: September 14, 2009, 03:16:08 PM »
Looks sharp, Good job Peter as always.

It looks like you dropped the Attack mod?
Intentionally left blank

Greg

Re: New design 525... Any interest?
« Reply #12 on: September 14, 2009, 03:19:31 PM »
I've built one of the 1st generations... use it all the time. I might be interested in a 2nd, but have to think it over. Hope you ditched the attack mod cause it's busted.
Greg Stein
New Orleans, LA

[silent:arts]

Re: New design 525... Any interest?
« Reply #13 on: September 14, 2009, 03:24:28 PM »
cool Peter. any chance for a stereo link switch?

Sure... as long as the 120R resistor can be put between a pair of pin6s on your backplane.
this is possible 8):
there are jumpers between each slot to connect pin6 together, no problem to install a resistor there:

« Last Edit: September 14, 2009, 03:38:14 PM by [silent:arts] »

Re: New design 525... Any interest?
« Reply #14 on: September 14, 2009, 04:13:04 PM »
No problem then.
http://www.lazpro.com
I reserve the right to not sell to idiots

Re: New design 525... Any interest?
« Reply #15 on: September 14, 2009, 04:13:53 PM »
It looks like you dropped the Attack mod?

Yes.
http://www.lazpro.com
I reserve the right to not sell to idiots

[silent:arts]

Re: New design 525... Any interest?
« Reply #16 on: September 14, 2009, 04:18:13 PM »
if stereo is switchable: two for me please  :-*

Biasrocks

Re: New design 525... Any interest?
« Reply #17 on: September 14, 2009, 04:30:58 PM »
I'm interested.

Mark
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

ChrioN

Re: New design 525... Any interest?
« Reply #18 on: September 14, 2009, 05:02:29 PM »
Looks very good. Interested in two.
"All PCB traces are curved to emulate the electrical response of point-to-point wiring" -Drip

jsteiger

Re: New design 525... Any interest?
« Reply #19 on: September 14, 2009, 09:35:31 PM »
Nice work as always Peter. I would be in for a pair.  ;)
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.


 

Related Topics

  Subject / Started by Replies Last post
API 525 compressor

Started by ChrisA « 1 2 ... 9 10 » The Lab

182 Replies
71262 Views
Last post April 15, 2007, 06:19:58 AM
by Tubemooley
3 Replies
1497 Views
Last post April 19, 2005, 11:27:02 PM
by BradAvenson
1 Replies
840 Views
Last post January 02, 2011, 08:04:49 PM
by QUEEF BAG
153 Replies
44693 Views
Last post August 05, 2018, 07:00:43 PM
by PATAPETER