seavote
Well-known member
i housed my compressor in an old tube radio amplifier.
here's the raw (drilled) face plate attached to the unit.
a look at the inside. with transformers only
two shots of the finished unit. not high tech but all together the faceplate and enclosure cost me $0.00.
faceplate was 1 piece of scrape sheet metal and a scape of aluminum i got from some sheetmetal workers i know and glued together(contact cement)
here's the raw (drilled) face plate attached to the unit.
a look at the inside. with transformers only
two shots of the finished unit. not high tech but all together the faceplate and enclosure cost me $0.00.
faceplate was 1 piece of scrape sheet metal and a scape of aluminum i got from some sheetmetal workers i know and glued together(contact cement)